AudioQuest Red River (XLR ↔ XLR) 類比訊號線 1.0m

Since the beginning, AudioQuest has pioneered the use of superior metals, yet even we were surprised by the huge leap in performance attained through the astonishingly smooth and pure surface of Perfect-Surface Copper (PSC). Proprietary metal-processing technology protects the wire"s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure, and smooth as possible, it becomes a wonderfully low-distortion conductor. In a conventional cable, electrical and magnetic interaction between strands is one of the greatest sources of distortion, often causing a somewhat harsh, dirty sound. Solid conductors are fundamental toward achieving a very clean, natural sound.

METAL-LAYER NOISE-DISSIPATION
It"s easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment"s ground reference requires AQ"s Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

TRIPLE-BALANCED GEOMETRY (SEPARATE GROUND-REFERENCE CONDUCTOR)
Our Triple-Balanced Geometry uses a separate ground-reference conductor, so the cable"s shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs, the cable"s three conductors ensure that the positive and negative signals have equally superior, low-distortion conducting paths.

COLD-WELDED, GOLD-PLATED TERMINATIONS
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

實心完美表面銅 (PSC) 導體
從一開始，AudioQuest 就率先使用優質金屬，但即使我們也對透過完美表面銅 (PSC) 的驚人光滑和純淨表面實現的性能巨大飛躍感到驚訝。專有的金屬加工技術可在拉絲和製造的每個階段保護線材的表面。當高純度低氧化銅盡可能保持柔軟、純淨和光滑時，它就會成為一種極低失真的導體。在傳統電纜中，絞線之間的電磁相互作用是最大的失真源之一，通常會導致有些刺耳、骯髒的聲音。實心導體是實現非常乾淨、自然的聲音的基礎。

金屬層噪音消散
很容易實現 100% 的護盾覆蓋率。防止捕獲的射頻幹擾 (RFI) 調變設備的接地參考需要 AQ 的雜訊耗散。傳統的屏蔽系統通常會吸收雜訊/射頻能量，然後將雜訊/射頻能量排出到組件接地，從而調製和扭曲關鍵的「參考」接地平面，進而導致訊號失真。噪音消散“屏蔽屏蔽”，在噪音/射頻能量到達接地層之前吸收並反射大部分噪音/射頻能量。

三重平衡幾何結構（獨立的接地參考導體）
我們的三重平衡幾何結構使用單獨的接地參考導體，因此電纜的屏蔽層永遠不會用作劣質導體。無論是配備 RCA 還是 XLR 插頭，此電纜的三個導體都可確保正負訊號具有同樣出色的低失真傳導路徑。

冷焊鍍金端子
這種插頭設計可以實現無焊料的連接，而焊料是變形的常見來源。該工藝採用高壓技術代替焊接。由於接地殼是沖壓而成而不是機械加工，因此可以選擇所用金屬來實現低變形而不是機械加工。

North America has two Red Rivers, North and South. Red River South has been home to many peoples; it once was the border between the US and colonial Spain, and today forms part of the border between the rival states of Texas and Oklahoma.

Red River North forms in a confluence of rivers in North Dakota and Minnesota, but its history is Canada’s. The Red River North’s early settlers were the Métis, whose ancestry was French and aboriginal Canadian. The Métis in 1869 began an uprising known as the Red River Rebellion, which challenged the Canadian government, eventually leading to the formation of the province of Manitoba.SOLID PERFECT-SURFACE COPPER (PSC) CONDUCTORS

北美洲有兩條紅河，北河和南河。紅河南岸曾是許多民族的家。它曾經是美國和西班牙殖民地之間的邊界，如今成為德克薩斯州和俄克拉荷馬州之間的邊界的一部分。

紅河北區形成於北達科他州和明尼蘇達州河流的交匯處，但其歷史屬於加拿大。紅河以北的早期定居者是梅蒂斯人，他們的血統是法國人和加拿大原住民。1869 年，梅蒂斯人發起了一場名為「紅河叛亂」的起義，挑戰加拿大政府，最終導致馬尼托巴省的成立。